← back

!! NOT FOR OPERATIONAL USE !! data may be stale, incomplete, or wrong

raw text:

ADVANCED ATC TOWER PROCEDURES IN PROGRESS. A-DPI AND C-DPI
MESSAGES ARE SENT TO NMOC AND BE USED FOR AIR TRAFFIC FLOW
MANAGEMENT (ATFM) PURPOSES. AOBT (ACTUAL OFF BLOCKS TIMES) FOR ALL
DEPARTING IFR FLIGHTS.
1.1.ADS-B DATA REQUIRED FOR OPERATIONS.
1.1.1.FOR ADS-B DATA USED BY THE AD OPERATOR AND EUROCONTROL, PILOTS
OF AIRCRAFT EQUIPPED WITH MODE S  AND ADS-B FUNCTIONALITY MUST, WHEN
OPERATING ON THE GROUND:
A) SELECT AUTOMATIC MODE AND THE ASSIGNED MODE A, OR
B) IF AUTOMATIC MODE IS NOT AVAILABLE, SELECT ON AND THE ASSIGNED MOD
A
-FROM THE REQUEST OF PUSH-BACK.
-AFTER LANDING, UNTIL THE AIRCRAFT HAS STOPPED ON HIS STAND.
-WHEN THE AIRCRAFT IS FULLY PARKED, THE PILOT SHALL SELECT STBY.
-1.1.2. WHEN THE AIRCRAFT IS CAPABLE OF COMMUNICATING ITS
IDENTIFICATION (I.E THE CALL SIGN USED IN FLIGHT), THIS MUST BE
ENTERED (VIA THE FMS OR TRANSPONDER CONTROL PANEL )AT THE TIME OF
THE PUSH-BACK REQUEST.
1.1.3. THE CREW MUST USE THE FORMAT DEFINED BY ICAO TO ENTER THE
AIRCRAFT IDENTIFICATION.
1.1.4.IN ORDER NOT TO COMPROMISE THE PERFORMANCE OF SYSTEMS BASED
ON SSR FREQUENCIES (INCLUDING AIRBORNE TCAS AND SSR RADARS), TCAS
SHOULD NOT BE SELECTED BEFORE RECEIVING CLEARANCE TO LINE UP, AND
SHOULD BE DESELECTED AFTER VACATING THE RUNWAY.

icao text:

B0711/26 NOTAMR B0710/26
 Q) LGGG/QFAXX/IV/NBO/AE/000/999/4055N02437E005
 A) LGKV B) 2604201602 C) 2607152059
 E) ADVANCED ATC TOWER PROCEDURES IN PROGRESS. A-DPI AND C-DPI
 MESSAGES ARE SENT TO NMOC AND BE USED FOR AIR TRAFFIC FLOW
 MANAGEMENT (ATFM) PURPOSES. AOBT (ACTUAL OFF BLOCKS TIMES) FOR ALL
 DEPARTING IFR FLIGHTS.
 1.1.ADS-B DATA REQUIRED FOR OPERATIONS.
 1.1.1.FOR ADS-B DATA USED BY THE AD OPERATOR AND EUROCONTROL, PILOTS
 OF AIRCRAFT EQUIPPED WITH MODE S  AND ADS-B FUNCTIONALITY MUST, WHEN
 OPERATING ON THE GROUND:
 A) SELECT AUTOMATIC MODE AND THE ASSIGNED MODE A, OR
 B) IF AUTOMATIC MODE IS NOT AVAILABLE, SELECT ON AND THE ASSIGNED MOD
 A
 -FROM THE REQUEST OF PUSH-BACK.
 -AFTER LANDING, UNTIL THE AIRCRAFT HAS STOPPED ON HIS STAND.
 -WHEN THE AIRCRAFT IS FULLY PARKED, THE PILOT SHALL SELECT STBY.
 -1.1.2. WHEN THE AIRCRAFT IS CAPABLE OF COMMUNICATING ITS
 IDENTIFICATION (I.E THE CALL SIGN USED IN FLIGHT), THIS MUST BE
 ENTERED (VIA THE FMS OR TRANSPONDER CONTROL PANEL )AT THE TIME OF
 THE PUSH-BACK REQUEST.
 1.1.3. THE CREW MUST USE THE FORMAT DEFINED BY ICAO TO ENTER THE
 AIRCRAFT IDENTIFICATION.
 1.1.4.IN ORDER NOT TO COMPROMISE THE PERFORMANCE OF SYSTEMS BASED
 ON SSR FREQUENCIES (INCLUDING AIRBORNE TCAS AND SSR RADARS), TCAS
 SHOULD NOT BE SELECTED BEFORE RECEIVING CLEARANCE TO LINE UP, AND
 SHOULD BE DESELECTED AFTER VACATING THE RUNWAY.

downloads:

• raw AIXM 5.1 XML
• GeoJSON Feature

!! NOT FOR OPERATIONAL USE !! data may be stale, incomplete, or wrong

© 2026 coredoes.dev