eed37ae3-f3a0-4ac0-9619-72d8d978d73b2026-06-03T11:00:00.000ZBASELINE106000A6712026N2026-05-29T14:14:00.000ZESAAQCDXXIBOA0009995740N01217E005ESGG202606031100PERMDEPARTURE PLANNING INFORMATION MSG CA-DPI AND C-DPI) PROVIDED TO NETWORK MANAGER OPERATIONS CENTER (NMOC). 1.1. ADS-B DATA REQUIRED 1.1.1. FOR ADS-B DATA USED BY THE AD OPERATOR AND EUROCONTROL, PILOTS OF AIRCRAFT EQUIPPED WITH MODE S AND ADS-B FUNCTIONALITY MUST, WHEN OPERATING ON THE GROUND: A) SELECT AUTOMATIC MODE AND THE ASSIGNED MODE A, OR B) IF AUTOMATIC MODE IS NOT AVAILABLE, SELECT ON AND THE ASSIGNED MODE A: - FROM THE REQUEST OF PUSH-BACK. - AFTER LANDING, UNTIL THE AIRCRAFT HAS STOPPED ON HIS STAND. - WHEN THE AIRCRAFT IS FULLY PARKED, THE PILOT SHALL SELECT STBY. 1.1.2. WHEN THE AIRCRAFT IS CAPABLE OF COMMUNICATING ITS IDENTIFICATION (I.E. THE CALLSIGN USED IN FLIGHT), THIS MUST BE ENTERED (VIA THE FMS OR TRANSPONDER CONTROL PANEL) AT THE TIME OF THE PUSH-BACK REQUEST. 1.1.3. THE CREW MUST USE THE FORMAT DEFINED BY ICAO TO ENTER THE AIRCRAFT IDENTIFICATION. 1.1.4. IN ORDER NOT TO COMPROMISE THE PERFORMANCE OF SYSTEMS BASED ON SSR FREQUENCIES (INCLUDING AIRBORNE TCAS AND SSR RADARS), TCAS SHOULD NOT BE SELECTED BEFORE RECEIVING CLEARANCE TO LINE UP, AND SHOULD BE DESELECTED AFTER VACATING THE RUNWAY.OTHER:ICAO<pre> A0671/26 NOTAMN Q) ESAA/QCDXX/I /BO /A /000/999/5740N01217E005 A) ESGG B) 2606031100 C) PERM E) DEPARTURE PLANNING INFORMATION MSG CA-DPI AND C-DPI) PROVIDED TO NETWORK MANAGER OPERATIONS CENTER (NMOC). 1.1. ADS-B DATA REQUIRED 1.1.1. FOR ADS-B DATA USED BY THE AD OPERATOR AND EUROCONTROL, PILOTS OF AIRCRAFT EQUIPPED WITH MODE S AND ADS-B FUNCTIONALITY MUST, WHEN OPERATING ON THE GROUND: A) SELECT AUTOMATIC MODE AND THE ASSIGNED MODE A, OR B) IF AUTOMATIC MODE IS NOT AVAILABLE, SELECT ON AND THE ASSIGNED MODE A: - FROM THE REQUEST OF PUSH-BACK. - AFTER LANDING, UNTIL THE AIRCRAFT HAS STOPPED ON HIS STAND. - WHEN THE AIRCRAFT IS FULLY PARKED, THE PILOT SHALL SELECT STBY. 1.1.2. WHEN THE AIRCRAFT IS CAPABLE OF COMMUNICATING ITS IDENTIFICATION (I.E. THE CALLSIGN USED IN FLIGHT), THIS MUST BE ENTERED (VIA THE FMS OR TRANSPONDER CONTROL PANEL) AT THE TIME OF THE PUSH-BACK REQUEST. 1.1.3. THE CREW MUST USE THE FORMAT DEFINED BY ICAO TO ENTER THE AIRCRAFT IDENTIFICATION. 1.1.4. IN ORDER NOT TO COMPROMISE THE PERFORMANCE OF SYSTEMS BASED ON SSR FREQUENCIES (INCLUDING AIRBORNE TCAS AND SSR RADARS), TCAS SHOULD NOT BE SELECTED BEFORE RECEIVING CLEARANCE TO LINE UP, AND SHOULD BE DESELECTED AFTER VACATING THE RUNWAY. </pre>INTLESSAYNYXLANDVETTEREUECYIYN2026-05-29T14:15:00.000ZESGG